Step 2: Assembly
Step 1: Attach the Back and Bottom Panels
- Align the back panel with the bottom panel.
- Secure the back panel to the bottom using 2 screws.
Step 2: Secure the Side Panels
- Stand the back panel upright.
- Attach the left and right side panels to the bottom and back panels.
- Use 6 screws to fasten the side panels securely in place.
Step 3: Attach the Top Panel
- Place the top panel over the assembled back and side panels.
- Secure the top panel with 6 screws.
Step 4: Install the Front Door
- Position the door in front of the assembled cabinet structure.
- Attach the door using 8 screws.
Step 5: Insert the Door Pin
- Locate the hinge hole at the bottom of the door.
- Insert the hinge pin through the hole to secure the door in place.
Step 6: Install the Electronic Lock
- Align the electronic lock mechanism with the pre-drilled holes inside the left panel.
- Secure the lock using the provided lock body screws.
- Connect the electronic lock to the controller in the top panel using the provided cable.
Step 7: Check & Tighten Screws
- Ensure all screws are tightened securely.
- Verify the structural integrity of the box.